Going to the car servicing center is great but we all know we can’t always go, so we end up taking care of the car detailing ourselves. But just because we aren’t experts in that field doesn’t mean we can’t achieve professional standard results. Here are some tips to help you detail your car like an expert!
Dry Glass Surfaces In Two Directions
Streaks are annoying, it makes it look like you did a sloppy job cleaning your car. To avoid this, try drying the surfaces in two direction. For example, go vertical when wiping first then go over it again in horizontal direction.
Clean The Top Most Portion Of The Windows
When you don’t clean this part it comes back ruining your effort to clean because buildup dirt and grime can drip and streak eventually. So roll down the windows and make sure you clean this part first so you don’t forget it later on.
Treat Your Trim First
Black plastic trim requires different care and maintenance from the rest of the bodywork. To keep plastic trim looking its best, we’d recommend treating it with a black restoring product before waxing and polishing the surrounding metalwork.
Apply Wax With Buffer –Don’t Remove It With One
A power buffer is a great way to get professional results, but only when you know how to use it properly. For best results, you should only use it when applying wax on your vehicle, not when you’re trying to remove it.
Use Plastic Bag When Checking Surfaces
When you apply wax, or polish or even when you just had it repainted, it takes time for the product to dry and set. But aside from that, you also have to check for imperfections like bubbles or any dirt that got stuck on it. Naturally you use your hands to feel for those imperfection, but the thing is doing that will leave fingerprints. To avoid this put your hand in a standard plastic carrier bag and run it over the surface of the car.
The Cloth You Use Matters
Always use microfiber cloths when cleaning your car. It only takes a rough towel or dirt on a towel to scratch your precious paint job. Do not risk it and make sure you’re always using clean microfiber cloth to wipe your car with.
Invest In Dual Action Polisher
Polishing is one of the most misunderstood paint care procedures and as a result many individuals skip this important step. Polish is an abrasive compound, which, when worked into the paint using the hand or a polisher, shaves off imperfections of the paint. It levels out the surface and makes it smooth, thereby preparing it for the next step of applying wax or paint sealant. If you wax without polishing the surface first, not only will the paint look dull, but you will also notice that the wax layer will wear off quicker than usual. So ultimately it is a huge waste of your time and resources. Because polish is abrasive, it is important to master polishing techniques especially if you are using a rotary buffer, or you risk burning right through the paint. Having said all that, take it up a notch and invest in a dual action while you’re at it. Perfect for ironing out areas of abrasion, and removing layers of old wax, these motorized polishers will ensure your car always has a smooth, even finish for a lasting just-bought shine.
Use Static Electricity On Carpets
Carpets collect dust, dirt and other bits that can be difficult to remove even when using a vacuum. To loosen those bits up, wear latex glove and gently rub your hands across the surface of the carpet. This creates static that draw bits upwards and out of the fibers of the carpet making it easier for the vacuum to suck everything up.
Deodorize Your Vents Using Compressed Air
If your car no longer has that new car scent, and you’ve tried a range of air freshening products without success, use a can of compressed air to give the vents a quick blast. Dust, dirt and moisture can build up on the inside of air vents, causing stale odors to circulate through the cabin whenever they’re in use. Compressed air will remove the offending muck, grime and bacteria, giving your car a fresher, more neutral smell.
ALSO READ:
Walang komento:
Mag-post ng isang Komento